Filter
Top Products
10 - 8
Profile Parameters
Parameter Default Explanation
Edit Profile Default A string of 1 to 32 alphanumeric characters, establishes the name of the
Profile.
Options are Default or ThirdPartyConfig.
SSID Blank A string of up to 32 alphanumeric characters. Establishes the Service
Set Identifier (SSID) of the WLAN to which the client connects.
Client Name Blank A string of up to 16 characters. The client name is assigned to the
network card and the device using the network card. The client name
may be passed to networking wireless devices, e.g., Access Points.
Power Save Fast Power save mode is On.
Options are: Constantly Awake Mode (CAM) power save off, Maximum
(power saving mode) and Fast (power saving mode).
Tx Power Maximum Maximum setting regulates Tx power to the Max power setting for the
current regulatory domain.
Options are: Maximum, 50mW, 30mW, 20mW, 10mW, 5mW, or 1mW.
Bit Rate Auto Setting the rate to Auto will allow the Access Point to automatically
negotiate the bit rate with the client device.
Options are: Auto, 1 Mbit, 2, 5.5, 6, 9, 11, 12, 18, 24, 36, 48 or 54 Mbit.
Auth Type Open 802.11 authentication type used when associating with the Access Point.
Options are: Open, LEAP, or Shared key.
EAP Type None Extensible Authentication Protocol (EAP) type used for 802.1x
authentication to the Access Point.
Options are: None, LEAP, EAP-FAST, PEAP-MSCHAP, PEAP-GTC, or
EAP-TLS.
Note: EAP Type chosen determines whether the Credentials button is
active and also determines the available entries in the Credentials
pop-up window.
Encryption None Type of encryption to be used to protect transmitted data. Available
options may vary by SCU version.
Options are: None, WEP (or Manual WEP), WEP EAP (or Auto WEP),
WPA PSK, WPA TKIP, WPA CCKM, WPA2 PSK, WPA2 AES, or WPA2
CCKM.
CKIP is not supported in the MX9.
Note: The Encryption type chosen determines if the WEP Keys / PSK
Keys button is active and also determines the available entries in
the WEP or PSK pop-up window.