Filter
Top Products
10 - 31
EAP-TLS
To use EAP-TLS, make sure the following profile options are used.
1. Enter the SSID of the Access Point assigned to this profile.
2. Set EAP Type to EAP-TLS.
3. Set Encryption to WPA TKIP.
4. Set Auth Type to Open.
5. To use another encryption type, select WPA CCKM, WPA2 AES or WPA2 CCKM for encryption and complete other
entries as detailed in this section.
6. See Sign-On vs. Stored Credentials (page 10-17) for information on entering credentials.
7. Tap the Credentials button.
• No entries except the User Certificate Filename and the CA Certificate Filename are necessary for Sign-On
Credentials as the user will be prompted for the User Name when connecting to the network.
• For Stored Credentials, User and the CA Certificate Filename must be entered.
8. Enter these items as directed below.
9. Enter the Domain\User name (if the Domain is required), otherwise enter the User name.