Filter
Top Products
88 Intel Storage System SSR212PP User Guide
Revision 1.0
PRELIMINARY
CAUTION
The bezel is required for EMI compliance when the storage system is powered
up. Remove it only to replace or add a disk module.
a. Insert the key that shipped with your storage system into the bezel lock, and turn it to
release the lock (Figure 33).
b. Press the two latch buttons on the bezel surface toward each other to release the bezel
from the cabinet (Figure 33).
c. Pull the bezel off the cabinet and put it on a clean, static-free surface.
FIGURE 33. Unlocking and Removing the Front Bezel
STEP 3. Locate the slot where you want to install the disk module, and remove the filler module
(Figure 34).
FIGURE 34. Removing a Disk Filler Module
SAB2937
EMC2810
Filler