Filter
Top Products
142 Intel Storage System SSR212PP User Guide
Revision 1.0
PRELIMINARY
STEP 10. Click View mutual CHAP credentials and confirm that the new CHAP entry exists.
STEP 11. Enable advanced CHAP on the storage system:
a. In the Navisphere Express navigation pane, under
Manage, click iSCSI to open the
Manage iSCSI screen.
b. Under
Security, click Advanced.
c. In the
iSCSI Security - Advanced screen, click Enable.
Configuring Basic Chap on a Windows Server with NICs
CAUTION
CHAP security must be enabled on the storage systembefore using the Configure
iSCSI connections on the Server Utility.
After entering CHAP data on the target, you must enter the same data on each NIC
initiator you log on to. On each initiator, you enter the initiator CHAP user account data
(username and secret) that the initiator sends to the target for authentication. For basic
initiator CHAP, this data is the initiator username and secret that you entered on the target.
When the initiator sends this data, the target compares it with an account database and
authenticates the initiator.
STEP 1. Log off and remove iSCSI targets using the instructions in "Removing iSCSI Targets" on
page 138.
STEP 2. On the server, open the Navisphere Server Utility. See Procedure 30, "Running the
Navisphere Server Utility," on page 165.
STEP 3. Select Configure iSCSI Connections on this server and click Next.
STEP 4. Select Configure iSCSI Connections and click Next.
STEP 5. In the iSCSI Targets and Connections window, select one of the following options to
discover the iSCSI target ports on the connected storage systems:
Discover iSCSI targets on this subnet scans the current subnet for all connected
SSR212PP2f-Series iSCSI storage system targets. The utility scans the subnet in the
range from 1 to 255. For example, if the current subnet is
10.12.77, the utility will
scan the IP addresses from
10.12.77.1 to 10.12.77.255.
If CHAP authentication is enabled on all target ports on a storage system, you
cannot discover using a subnet scan. You must discover the targets using the target
portal.
Discover iSCSI targets for this target portal discovers targets known to the specified
iSCSI SP data port.