Filter
Top Products
Intel Storage System SSR212PP User Guide 141
PRELIMINARY
You will also enter this secret for the server initiators.
You can specify the secret in ASCII or hexadecimal characters. ASCII secrets must consist
of at least 12 and no more than 16 characters. Hexadecimal secrets must consist of at least
12 and no more than 16 pairs of data (24 to 32 characters). If you specify the CHAP secret
using hexadecimal characters, you must select
CHAP Secret Specified In Hex.
STEP 10. In Step 4 on the screen, either click Apply to set the advanced initiator CHAP credentials
or click
Cancel to return to the Initiator CHAP Configuration - Advanced screen.
STEP 11. Click View all initiator CHAP credentials and confirm that the new CHAP entry exists.
Setting up Mutual Initiator CHAP on the Storage System
For optional mutual initiator CHAP, you enter the mutual CHAP username and secret that
you entered on each target on each initiator as well. If mutual CHAP is enabled, the target
sends its username and secret when it responds to the initiator. When the target sends this
data, the initiator compares it with an account database and authenticates the target.
STEP 1. On the Windows server that includes your iSCSI initiators, log off and remove iSCSI
targets following the instructions given in "Removing iSCSI Targets" on page 138.
STEP 2. On your storage system management station, start Navisphere Express on the storage
system you are configuring. See Procedure 29, "Running Navisphere Express," on
page 163.
STEP 3. In the Navisphere Express navigation pane, under Manage, click iSCSI.
The
Manage iSCSI screen opens.
STEP 4. Click Advanced.
STEP 5. In the iSCSI Security - Advanced screen, click Mutual CHAP Configuration.
STEP 6. In the Mutual CHAP Configuration - Advanced screen, click Add.
The
Add Mutual CHAP Credentials - Advanced screen opens.
STEP 7. In Step 1 on the screen, enter a CHAP username for the storage system.
STEP 8. In Step 2 on the screen, enter a CHAP secret that is not the same as any storage-system
initiator secret you specified, and confirm the secret.
You can specify the secret in ASCII or hexadecimal characters. ASCII secrets must consist
of at least 12 and no more than 16 characters. Hexadecimal secrets must consist of at least
12 and no more than 16 pairs of data (24 to 32 characters). If you specify the CHAP secret
using hexadecimal characters, you must select CHAP Secret Specified in Hex.
STEP 9. In Step 3 on the screen, click Apply to add the CHAP credential and return to the Mutual
CHAP Configuration - Advanced screen.