Filter
Top Products
Intel Storage System SSR212PP User Guide 151
PRELIMINARY
Configuring Advanced or Mutual CHAP on a Server with iSCSI
HBAs
STEP 1. Open the SANsurfer software.
STEP 2. Select the Target Settings tab.
STEP 3. Select Config Authentication from the bottom of the pane, and in the password prompt, use
the password
config.
STEP 4. Select the CHAP tab.
STEP 5. Under Initiator Name and Secret:
a. Click
Enable for your target IP.
b. If you are configuring mutual CHAP, select
Bidi (bi-directional).
c. Select
Set default initiator name and secret.
d. Type in the initiator name for your HBA initiator.
e. Type in the secret that you configured in Navisphere Express.
The Initiator Name and Initiator Secret fields in the middle window display will
populate automatically.
f. If you are configuring mutual CHAP:
i. Click the green plus sign (+) on the right of the
Target Table portion of the CHAP
screen.
ii. Double-click the blank row in the
Target Name column, and enter the target
CHAP username that you entered on the storage system.
iii. Double-click the row in the
Target Secret column, and enter the target CHAP
secret that you entered on the storage system.
g. Click
OK.
STEP 6. Save your changes on the Target Settings screen (the default password remains config).
STEP 7. Confirm that your session remains active.