Filter
Top Products
Intel Storage System SSR212PP User Guide 177
PRELIMINARY
FIGURE 68. Screen Shot: Copying the Boot Image
For SSR212PP2f or SSR212PPf (Fibre Channel) systems, skip Steps 12—15
and continue with STEP 19.
STEP 12. Verify that the operation completed successfully. You will see Success as shown in
Figure 68.
STEP 13. Press Enter to continue. The software displays the Toolkit Main Menu.
STEP 14. Select the Reset Storage Processor option.
The SP boots using the image you selected. It boots 3 times, and each boot may take up to
3 minutes. Be patient.
After the SP reboots, the amber LED on the SP back panel should be off.
STEP 15. Start Navisphere Express. See Procedure 29, "Running Navisphere Express," on page 163.
STEP 16. Select iSCSI from the Manage options, then select the port settings for the SP whose
image you just restored and press the
Apply button.
STEP 17. From the Manage iSCSI page, select Test.
STEP 18. Enter the IP address of the host NIC/HBA, and Ping the host to verify connectivity.