Filter
Top Products
2 Intel Storage System SSR212PP User Guide
Revision 1.0
PRELIMINARY
Storage System Management Ports
The storage system can have two management ports, one per storage processor (SP). Plan
the network and security characteristics for each management port and record the data
below. Your network administrator should provide this information.
❑ Provide a static IP address for each storage system MANAGEMENT port.
SP A MANAGEMENT port ______.______.______.______
SP B
MANAGEMENT port ______.______.______.______
Subnet mask ______.______.______.______
Default gateway ______.______.______._____
❑ Provide a username and password for your storage system.
Username ________________________
Password ________________________
Definitions
IP address The static network IP (Internet Protocol) address (for example,
128.222.78.10) for communication with a management port of a storage
processor (SP A or SP B). There is one management port per SP.
Subnet mask The subnet mask for the local area network (LAN) to which the storage
system is connected for management, for example,
255.255.255.0.
Gateway The gateway address for the LAN to which the storage system
management port is connected.
Username A valid username for logging in to the management interface must start
with a letter and may contain 1 to 32 letters and numbers. The name may
not contain punctuation, spaces, or special characters. You can use
uppercase and lowercase characters. Usernames are case-sensitive. For
example,
ABrown is a different username from abrown.
Password A password for logging in to the management interface may contain 1 to
32 characters, consisting of uppercase and lowercase letters and numbers.
As with the username, passwords are case-sensitive. For example,
Azure23 differs from azure23. The password is valid only for the
username you specified.