Filter
Top Products
20 Intel Storage System SSR212PP User Guide
Revision 1.0
PRELIMINARY
Administration Worksheet
The accompanying Administration Worksheet contains the following blanks that you will
need to fill in:
Storage system management port
Storage system iSCSI port
Initiator iSCSI port
Storage System Management Ports
The storage system can have two management ports, one per storage processor (SP). Plan
the network and security characteristics for each management port and record the data on
the accompanying Administration Worksheet. Use the A section to record network
information for the management interface. Your network administrator should provide this
information.
IP address The static network IP (Internet Protocol) address (for example,
128.222.78.10) for communication with a management port of a storage
processor (SP A or SP B). Each SP has one management port. Make sure
that your assigned addresses do not conflict with other devices on the
corporate network.
Subnet mask The subnet mask for the local area network (LAN) to which the storage
system is connected for management, for example,
255.255.255.0.
Gateway The gateway address for the LAN to which the storage system
management port is connected.
Username A valid username for logging in to the management interface must start
with a letter and may contain 1 to 32 letters and numbers. The name may
not contain punctuation, spaces, or special characters. You can use
uppercase and lowercase characters. Usernames are case-sensitive. For
example,
ABrown is a different username from abrown.
Password A password for logging in to the management interface may contain 1 to
32 characters, consisting of uppercase and lowercase letters and
SSR212PP-Series numbers. As with the username, passwords are case-
sensitive. For example,
Azure23 differs from azure23. The password is
valid only for the username you specified.
Storage System iSCSI Data Ports
Plan the network and security characteristics for each iSCSI data port and record the data
in the B section on the Administration Worksheet. Use the DATA port section to record
network information for the iSCSI data ports. Your network administrator should provide
this information.
IP address
The static network IP address of the storage system port (for example, 128.222.78.10).
This is a iSCSI data port on SP A or SP B. Each SP has two iSCSI data ports.
It is recommended to use these standard Internet addresses for private networks between
iSCSI data ports and their corresponding network interface cards and/or host bus adapters: