98 Intel Storage System SSR212PP User Guide
Revision 1.0
PRELIMINARY
FIGURE 46. Storage System Front LEDs
FIGURE 47. SSR212PP2f Storage System Power Button and Rear LEDs
If the amber System Fault light is on after powerup, a fault exists somewhere in the
storage system. If the amber light specific to a power supply, SP, or disk is on, then that
part is faulted.
Powering the Storage System Down
For an orderly storage system shutdown that protects your cache data, use the storage
system power button (not the UPS power switch). The storage system takes a full minute
to power down after you press the power button. So after powering down the storage
system, wait one minute before powering it on again. If storage system power is turned off
by the power button or by a software shutdown, you must press the power button to
reapply power. If you power down the storage system by unplugging the power cord, the
storage system powers up as soon as it is reconnected to the AC power source.
Fault
Disk Activity
SAB2934
Power
Lock
Power On/Off Button
Power LED
SP A Boot/Fault LED
Power Supply A Fault LED
PS A OnPS B On
SP B Boot/Fault LED
EMC3272
Power Supply B Fault LED