Filter
Top Products
Intel Storage System SSR212PP User Guide 61
6
PRELIMINARY
Installing HBAs in the
Server
For the server to communicate with the storage system Fibre Channel ports, the server
must have one or more supported host bus adapters (HBAs).
Before You Start
To complete this procedure, you need one or more supported HBAs with the latest
supported BIOS and driver. For information on supported HBAs, BIOS, and drivers, refer
to
Tested Hardware and OS List (THOL) on the SSR212PP support website.
Never mix HBAs from different vendors in the same server.
CAUTION
HBAs are very susceptible to damage caused by static discharge and need to be
handled accordingly. Before handling HBAs, observe the following precautions:
Store HBAs in anti-static bags.
Use a ground (ESD) strap whenever you handle HBAs.
Never plug or unplug HBAs with the power on. Severe component damage
can result.
STEP 1. If the server is powered up:
a. Shut down the server s operating system.
b. Power down the server.
c. Unplug the server s power cord from the power outlet.
STEP 2. Put on an ESD wristband, and clip its lead to bare metal on the server s chassis.
STEP 3. For each HBA that you are installing:
a. Locate an empty PCI bus slot.
b. Install the HBA following the instructions provided by the vendor.
STEP 4. Plug the server s power cord into the power outlet, and power up the server.