Filter
Top Products
Intel Storage System SSR212PP User Guide 81
PRELIMINARY
install the unit into a rack without a mechanical lift and/or help from another
person.
STEP 4. From the front of the cabinet, slide the storage system onto the rails so that the cutouts in
the rear of the chassis fit into the tabs on the back of each rail ( Figure 27).
If the chassis does not slide all the way into the cabinet, you may need to further loosen
the screws that hold the rear of the rails in place; then adjust the rail to allow the tabs to fit
into the cutouts.
FIGURE 27. Sliding the Chassis into the Cabinet
STEP 5. Use the four latch bracket screws to secure the storage system and latch brackets to each
front channel (Figure 28).
STEP 6. Snap the front bezel onto the storage system (Figure 28).
FIGURE 28. Securing the Chassis and Installing the Front Bezel
EMC2799
AF000637