Filter
Top Products
Diagnostic Information 2-37
5016-001
B Media tries to feed from MPT, 250 paper jam message may
display.
C Transparencies do not feed, or feed improperly from the MPT.
FRU Action
1 Media Be sure the media meets specifications.
2 Paper Transfer
Roller
Sheet Bypass
Paper Roller
Check the sheet bypass paper feed roller and
paper transfer roller for contamination, wear or
anything that would cause the rollers to feed
improperly.
Be sure the rollers operate properly and repair as
necessary.
3 Sheet Bypass
Paper Feed
Clutch (CL 2)
Check the bypass paper feed clutch for proper
operation and repair as necessary. Check the
voltages on CN12.
Pin # Voltage Voltage Voltage
Signal Clutch Clutch
Static Activated
1 (Brown) +5 V dc +5 V dc +5 V dc
2 (Red) KAMIARIO 0 V dc +5 V dc
3 (Orange) DGND 0 V dc 0 V dc
4 (Yellow) VP +24 V dc +24 V dc
5 (Blue) - SL4ON +24 V dc 0 V dc
All voltages are approximate values.
• If the voltage on pin 4 is incorrect, replace the
engine board.
• If the voltage on pin 5 is incorrect, replace the
bypass paper feed clutch.
FRU Action
1 Transparencies Be sure the transparencies meet specifications for
the 5016-001 printer and are designed for laser
printer applications.