Filter
Top Products
Repair Information 4-27
5016-001
Registration Roll Removal
1. Remove all covers, refer to the “Cover Removals” on
page 4-2.
2. Remove the LVPS assembly, refer to the “LVPS Assembly
Removal” on page 4-10.
3. Remove the C-clip and the shaft bearing from the left side of the
registration roll.
4. Unlatch the cable cover bracket.
5. Loosen the registration roll from the left side.
6. Remove the two (2) screws from the paper A guide and remove
the guide.
7. Remove the white clip from the right side of the registration roll
shaft.
8. Remove the clutch magnet.
9. Remove the second C-clip from the registration roll shaft.