Filter
Top Products
2-100 Service Manual
5016-001
A It is difficult to remove tray 1.
Note: Do not force tray 1 from the printer, as damage to the paper
detect sensor lever, or pick up roller bracket assembly, may occur.
Lift up on the bracket and sensor lever and carefully remove tray 1.
B Tray 1 is correctly installed and Insert Tray 1 displays.
Note: This message displays only when printing a page.
FRU Action
1 Paper Detect
Sensor Lever
Release Lever
Pick Up Return
Spring
Feed Frame
Check the paper feed frame, paper detect
sensor lever, release lever, and pick up spring
for correct installation and operation. If incorrect,
repair as necessary.
FRU Action
1 Paper Tray 1 Be sure the flag molded in the side of the tray is
not missing or broken.
2 Paper Detect/
Paper Size Detect
Board Assembly
If the board assembly, CST cable or engine
board are failing, the printer does not recognize
the installation of Tray 1. Be sure the paper
detect/paper size detect board is working
correctly. If no problem is found, replace the
FRUs in the following order:
1. Detect board
2. Engine board