Filter
Top Products
Diagnostic Information 2-23
5016-001
56 Parallel Port x
Disabled
Data was sent to the
specified parallel port, but
the port has been disabled
from the parallel buffer
menu item.
Press
Go to clear the
message. The printer
discards the data sent to the
parallel port.
To reset the printer:
• Press
Menu> or <Menu
until the Job Menu is
displayed.
• Press
Menu> or <Menu
until Reset Printer
appears on the second
line.
• Press
Select.
56 Serial x Port
Disabled
Data was sent to the
specified serial port, but
the port has been disabled
from the serial buffer
menu item.
Press
Go to clear the
message. The printer
discards the data sent to the
serial port.
To reset the printer:
• Press
Menu> or <Menu
until the Job Menu is
displayed.
• Press
Menu> or <Menu
until Reset Printer
appears on the second
line.
• Press
Select.
58 Too Many
Disks Installed
You have more than one
hard disk installed.
Turn the printer off and
follow the instructions in
your Setup Guide for
installing an optional hard
disk.
58 Too Many
Flash Options
You have more than one
flash option installed.
Turn the printer off and
follow the instructions in
your Setup Guide for
installing and removing flash
memory.
Message Status Action