Filter
Top Products
2-20 Service Manual
5016-001
52 Flash Full There is not enough
space available to hold
the resources you want to
store in flash memory.
Press
Go to clear the
message and continue
processing. Downloaded
fonts and macros not
previously stored in flash
memory or disk are deleted.
To reset the printer:
• Press
Menu> or <Menu.
The Job Menu is
displayed.
• Press
Menu> or <Menu
until Reset Printer
appears on the second
line.
• Press
Select.
53 Unformatted
Flash
The flash memory
installed in your printer
has not been formatted.
You must format the flash
memory before
downloading resources.
Press
Go to clear the
message. To format flash
memory, select Format
Flash from the Utilities
Menu.
54 Serial Option x
Error
The printer has detected a
protocol error on the
specified serial interface.
Be sure the serial
interface parameters are
set up correctly and you
are using an appropriate
serial cable.
Press
Go to clear the
message and continue
printing. The job may not
print correctly.
To reset the printer:
• Press
Menu> or <Menu.
The Job Menu is
displayed.
• Press
Menu> or <Menu
until Reset Printer
appears on the second
line.
• Press
Select.
Message Status Action