Filter
Top Products
Diagnostic Aids 3-7
5016-001
To set the Left Margin (only effects Tray 1 and the multipurpose
tray):
1. Select Registration from the Diagnostic menu.
2. Select Left Margin from the Registration menu.
3. Select the desired source and resolution. The value is displayed
in the operator panel.
4. To change the value, press either Menu> or Menu<. A positive
offset moves the margin to the right and a negative offset
moves the margin to the left.
5. To save the value press Select.
Note: If RETURN is pressed to exit the Registration menu following
a margin value change, but not saved with SELECT, the default
value is not changed.
6. To verify that the value has changed, print the Quick Test Page.
You may press Go from any of the TOP or LEFT Margin screens
to go immediately to the Quick Test page.
7. To exit the Registration menu, press Return.
Note: The range of Left Margin is -50 to +99.
The following printer functions may be shifted left or right for either
600 or 1200 dpi:
• Tray 1, Tray 2, Tray 3 - 600 or 1200 dpi
• Multipurpose Tray - 600 or 1200 dpi
The "Quick Test Page" should be printed on letter or A4 paper.