Filter
Top Products
2-22 Service Manual
5016-001
54 Par x ENA
Connection Lost
An External Network
Adapter (ENA) that was
once connected to the
specified parallel port is
no longer responding. The
printer only recognizes the
missing connection when
the printer power is first
turned on.
• Be sure the cable
connecting the ENA and
the printer is securely
attached. Turn the printer
off and then on again to
see if the printer
recognizes the
connection.
• Press
Go to clear the
message. The printer
erases any reference to
the ENA and then resets.
55 Insufficient Fax
Buffer
This attendance message
may appear if the printer is
processing a print job. The
printer must complete the
print job before processing
the fax data. If the fax
buffer is not large enough
to hold the fax data, this
message is displayed.
After this message is
posted, the printer breaks
the phone connection with
the sending fax printer.
The ability of the printer to
process fax data exceeds
the data transmission rate
of most fax printers.
Press
Go to clear the
message and continue
processing the current print
job.
To reset the printer:
• Press
Menu> or <Menu
until the Job Menu is
displayed.
• Press
Menu> or <Menu
until Reset Printer
appears on the second
line.
• Press
Select.
56 Std Parallel
Port Disabled
Data was sent to the
standard parallel port, but
the port has been disabled
from the Parallel Buffer
menu item.
Press
Go to clear the
message. The printer
discards the data sent to the
parallel port.
To reset the printer:
• Press
Menu> or <Menu.
The Job Menu is
displayed.
• Press
Menu> or <Menu
until Reset Printer
appears on the second
line.
• Press
Select.
Message Status Action