Filter
Top Products
Diagnostic Information 2-111
5016-001
C Tray x is correctly installed and "Insert Tray x" displays.
Note: If the detect board for the tray x cable (detect board to
interconnect board), LVPS, LVPS fuse, interconnect board, option
cable (OP), engine cable (OP) or engine board are failing, this
message may display.
FRU Action
1 Paper Tray x Check tray x to be sure the flag molded in the side
of the tray is not damaged and contacts the sensor
flag.
2 Option LVPS
Fuse
Check the fuse in the option LVPS and replace it, if
defective. If the fuse continues to blow, replace the
LVPS assembly.
3OP Cable
(Option)
OP Cable
(Printer)
Check the cables for correct installation and signs
of damage.
4 Paper Detect/
Paper
Size Detect
Board
Tray x
Check the paper detect/paper size board for
correct operation, If incorrect replace the board
assembly.
5 Interconnect
Board
Engine Board
If no problems have been found, replace the
following FRUs in the order shown:
1. Interconnect board assembly
2. Engine board assembly