Filter
Top Products
2-24 Service Manual
5016-001
61 Defective Disk The hard disk installed in
your printer is defective.
Press Go to clear the
message and continue
printing. You must install a
different disk before you can
perform any disk functions.
62 Disk Full There is not enough
space available to hold
the resources you want to
store on disk.
Press
Go to clear the
message and continue
processing. Downloaded
fonts and macros not
previously stored in flash
memory or disk are deleted.
To reset the printer:
• Press
Menu> or <Menu.
When the Job Menu is
displayed press
Select.
• Press
Menu> or <Menu
until Reset Printer
appears on the second
line.
• Press
Select.
63 Unformatted
Disk
The hard disk installed in
your printer has not been
formatted. You must
format the disk before you
can download resources
to it.
Press
Go to clear the
message. If the error
message remains, the disk
may be defective and need
replacing.
To format the disk, select
Format Disk from the
Utilities Menu.
64
Disk not in Slot 3
If you place an optional
hard disk in slot 1 or 2, this
message appears on the
operator panel. The
optional hard disk must be
placed in slot 3 for the
printer to operate. If you
have another adapter in
slot 3, move it to slot 1 or
2 and place the hard disk
in slot 3.
Refer to your Setup Guide
for information on installing
an optional hard disk in your
printer.
Note: Do not attempt to
remove or install the hard
disk with the printer power
on or the power cord
connected.
Message Status Action