Filter
Top Products
Diagnostic Information 2-25
5016-001
70–79 Network Reserved for messages
relating to the optional
print server sometimes
referred to as an Internal
Network Adapter (INA)
installed in your printer.
For more information, refer
to the online documentation
included on the printer CD
under “Network Printing.”
83 Transfer Belt
Life Warning
This message indicates
the waste toner area is
full.
If you suspect a false waste
toner full condition has
occurred, you can clean the
waste toner sensor.
84 Transfer Belt
Life Warning
This message indicates
the transfer belt is nearing
its end of life. The transfer
belt is a part of the
transfer kit. If you do not
have an extra transfer kit,
order it now.
Press
Go to clear the
message and continue
printing. The
Supplies
status message displays
with the
Ready, Power
Saver
, Busy and Waiting
messages, unless another
status message of higher
priority is posted, or until
you replace the transfer belt.
84 Transfer Belt
Exhausted
This message indicates
the transfer belt is
exhausted and must be
replaced.
A new transfer belt must be
installed to clear this error
message.
85 Coating Roll
Life Warning
This message indicates
the coating roll is nearing
its end of life or empty
condition. Normally the
coating roll is replaced
when you replace the
black print cartridge. It is
possible, depending on
the type of print jobs you
send to the printer, a
coating roll may have to
be replaced prior to the
print cartridge becoming
low on toner. If you do not
have an extra coating roll,
order it now.
Press
Go to clear the
message and continue
printing. The
Supplies
status message is displays
with the
Ready, Power
Saver
, Busy and Waiting
messages, unless another
status message of higher
priority is posted, or until
you replace the coating roll.
Note: Continued use of the
coating roll after the warning
has been displayed may
result in poor toner adhesion
to print media, other print
quality problems, and paper
jams.
86 Transfer Belt
Missing
The transfer belt is not
installed in the printer.
Insert the transfer belt and
close the front cover to clear
the message.
Message Status Action