Filter
Top Products
4-18 Service Manual
5016-001
Cable Cover 3 Removal
1. Remove the left side cover, refer to the “Left Side Cover
Removal” on page 4-3.
2. Remove the screw (1) from the left side frame. The screw can
be seen behind the cover interlock switch cable.
3. Remove the cover interlock switch cable from the cable cover 3.
Take care when removing the cable, as it must be released from
the cable retainers which are molded into the cable
cover 3.
Note: When replacing cable cover 3, be sure to reposition the
cover interlock switch cable back behind the cable retainers.
Cover Interlock Switch Removal
1. Remove the left side cover, refer to the “Left Side Cover
Removal” on page 4-3.
2. Remove the screw (1) from the cover interlock switch and
remove the assembly.
Micro Switch Removal
1. Remove the right side cover, refer to the “Right Side Cover
Removal” on page 4-4.
2. Remove the screw (1) from the micro switch assembly.
3. Disconnect the switch and remove the assembly.