Filter
Top Products
Diagnostic Aids 3-21
5016-001
Laser Power
This setting controls how much power is used to drive the laser. A
higher, or more positive number, makes a darker copy, while a lower
number makes a lighter copy.
Parallel Strobe Adjustment
This setting allows the user to adjust the factory setting for the
amount of time strobe sampled, to determine that valid data is
available on the parallel port.
Incrementing this value means that strobe is sampled 50ns longer.
Decrementing this value means that strobe is sampled 50ns shorter.
The range of this setting is -4 to +6.
Example of setting:
• A value of 0 indicates no adjustment is sampled from the factory
setting.
• A value of -1 indicates the sample strobe time is reduced by
50ns.
• A value of +3 indicates the sampled strobe time is increased by
150ns.