Filter
Top Products
Repair Information 4-7
5016-001
Coupling Drive Motor Removal
1. Remove the right side cover, refer to the “Right Side Cover
Removal” on page 4-4.
2. Remove the motor mounting stay assembly, refer to the “Motor
Mounting Stay C Assembly Removal” on page 4-13.
3. Remove the two (2) screws from the coupling drive motor.
4. Remove the coupling drive motor.
Developer Drive Motor Assembly Removal
1. Remove the right side cover, refer to the “Right Side Cover
Removal” on page 4-4.
2. Remove the three (3) screws [A] from the developer drive
motor assembly.
3. Disconnect the developer drive cable [B].
4. Remove the developer drive motor assembly.