Filter
Top Products
2-106 Service Manual
5016-001
Options Service Checks
When you have a problem with any of the options installed in the
options slots on the interconnect board, switch the non-operating
option to one of the other option slots, to isolate the failure.
Flash Memory Option(s) Service Check
Run a copy of the test page and verify the option you are checking is
listed. The printer does not recognize options installed, if those
options are not listed. Be sure the Memory SIMM is installed
correctly and not broken or damaged. If the Memory SIMM is
correctly installed, not broken or damaged, run the “Flash Test” on
page 3-17. If the test fails, replace the Flash SIMM. If the problem
continues, replace the controller board.
DRAM Memory Option(s) Service Check
This service check is the same as the flash memory option service
check with the following exception:
If the DRAM Memory SIMM is correctly installed and not broken or
damaged, run the “SDRAM Memory Test” on page 3-10 from the
menu. If the test fails, replace the DRAM SIMM. If the problem
continues, replace the controller board.