Filter
Top Products
Repair Information 4-3
5016-001
Cartridge Cover Removal
1. Remove the two (2) left and right white plastic cover pins by
pulling inward.
2. Remove the cartridge cover.
Front Cover Removal
1. Lower the front cover and remove the front cover strap screw.
2. Unsnap the front cable cover.
3. Disconnect the front cover cable.
4. Lift the front cover upward and out of the printer.
Fuser Cover Removal
1. Lift the fuser cover.
2. Remove the two (2) screws (left and right) from the fuser cover
lever and remove the fuser cover.
Left Side Cover Removal
1. Lower the bypass tray 2.
2. Unlatch and lower the front cover.
3. Remove the four (4) screws from the left side cover and remove
the left side cover.
Operator Panel Cover Removal
1. Open the fuser cover.
2. Remove the two (2) screws from the operator panel cover.
3. Disconnect the operator panel cable.
4. Remove the operator panel cover.
Rear Cover Removal
1. Loosen the four (4) screws from the rear cover.
2. Remove the rear cover.