Filter
Top Products
3-18 Service Manual
5016-001
Flash Test
This test causes the file system to write and read data on the flash to
test the flash.
WARNING: This test destroys all data on the flash because the
flash is reformatted at the end of the test.
To run the Flash Test:
1. Select Flash Test from the Device Tests menu.
• The power indicator blinks while the test is running.
• “Flash Test/Test Passed” message displays if the test
passes and the power indicator turns on solid.
• “Flash Test/Test Failed” message displays if the test fails and
the power indicator turns on solid.
2. Press Go or Return/Stop to return to the Device Tests menu.