Filter
Top Products
4-4 Service Manual
5016-001
Right Side Cover Removal
1. Raise both the fuser door and the cartridge cover.
2. Open the bypass tray 2.
3. Remove the four (4) screws from the right side cover.
4. Close the bypass tray 2.
5. Remove the right side cover.
Top Cover Removal
1. Remove the rear cover, refer to the “Rear Cover Removal” on
page 4-3.
2. Remove the left side cover, refer to the “Left Side Cover
Removal” on page 4-3.
3. Remove the right side cover, refer to the “Right Side Cover
Removal” on page 4-4.
4. Remove the operator panel cover, refer to the “Operator Panel
Cover Removal” on page 4-3.
5. Remove the six (6) screws from the top cover and remove the
cover.
Note: Take care not to lose the two cartridge door springs attached
to the two screws on the left and right of the top cover.
Top (Small) Cover Removal
1. Remove the top cover, refer to the “Top Cover Removal” on
page 4-4.
2. Lift the top (small) cover.
3. Remove the three (3) screws from the bottom of the cover.
4. Remove the cover top (small) cover.