Filter
Top Products
Diagnostic Information 2-85
5016-001
Evenly Spaced Horizontal Lines/Marks Service Check
FRU Action
1 Intermediate
Transfer Unit
Line spacing:
375 mm (circumference) apart - ITM belt.
33.3 mm (circumference) apart - supply roller.
34.8 mm (circumference) apart - developer roll.
94.2 mm (circumference) apart.
2 Fuser Assembly
Line spacing:
97 mm (circumference) or 30 mm (diameter) apart - hot
roll.
97 mm (circumference) or 30 mm (diameter) apart -
backup roll.
3 Registration
Roll
Line spacing:
50 mm (circumference) or 16.2 mm diameter
apart.
4 Transfer Roll Line spacing:
62 mm (circumference) or 20 mm (diameter) apart.
5 Oil Coating Roll Lines spacing:
87 mm (circumference) or 27 mm (diameter) apart.
6 Distance Distance between registration roll and transfer roll
35 mm.