Filter
Top Products
Diagnostic Information 2-15
5016-001
Load Manual You have sent a request
for a manual feed job to
the printer, and the printer
is ready for you to insert a
single sheet or envelope
into the multipurpose
feeder. The message
displays either the custom
media name defined using
the MarkVision utility, the
media size, or the media
size and type it is looking
for.
To clear the message, load
media of the requested size
and type in the multipurpose
feeder. Press
Select or Go
to ignore the manual feed
request and print on media
already installed in one of
the paper sources. If the
printer finds a tray that has
media of the correct size
and type, it feeds media
from that tray. If the printer
cannot find a tray with the
correct media size and type,
it prints on whatever media
is installed in the default
paper source.
To cancel the print job.
• Press
Menu> or <Menu.
The Job Menu is
displayed.
• Press
Menu> or <Menu
until Cancel Job appears
on the second line.
• Press
Select.
No Jobs Found
Retry?
This attendance message
occurs if you have entered
a PIN (Personal
Identification Number) to
print or delete a
Confidential Print Job and
your PIN is not associated
with any Confidential Print
Job currently stored in the
printer.
• Press
Go to enter another
PIN.
• Press
Return or Stop to
exit the PIN entry
operation.
Print Jobs on
Disk?
Jobs that were spooled to
the optional hard disk
before the printer was last
turned off have not yet
printed.
• Press
Go to print the jobs.
• Press
Return or Stop to
delete the jobs from the
disk without printing
them.
Message Status Action