Filter
Top Products
1-30 Service Manual
5016-001
Two sided print
When the printer has been set for two sided print mode and start is
pressed the following occurs:
When the setting is two pages. The paper feed roller in the printer
starts rotating. The paper is transported by the timing roller and the
back page is printed. The paper then passes through the fuser roller.
When the leading edge of the paper reaches the paper exit sensor in
the fuser, the upper unit motor starts rotating in the normal direction,
switching the gate claw to the inner side to receive the paper. When
the paper reaches the upper paper pass sensor, through the paper
transport roller, the rotation of the motor is switched to the
high-speed mode. At the same time, the lower unit motor begins
rotating in the normal direction in the high speed mode, transporting
the paper to the storage area in the lower unit through the rear unit.