National Instruments AT-MIO-16X Switch User Manual


 
Appendix A Specifications
AT-MIO-16X User Manual A-6
©
National Instruments Corporation
the same gain and all the signals are within 10% of the full-scale range
of each other (for example, within 2 V of each other with a ±10-V
range), the circuitry settles to full 16-bit accuracy (±0.5 LSB) in 10 µsec
and the channels can be scanned at the full rate of 100 ksamples/sec.
Analog Output
Number of output channels ................ 2
Type of DAC...................................... 16-bit, multiplying
Data transfers ..................................... DMA, programmed I/O, or
interrupts
Maximum update rate......................... 100 ksamples/sec
Relative accuracy (nonlinearity)......... ±4 LSB maximum, ±2 LSB
typical, bipolar
±8 LSB maximum, ±4 LSB
typical, bipolar
Differential nonlinearity..................... ±0.5 LSB maximum
(monotonic over temperature)
Offset error
After calibration .......................... ±305 µV maximum
Before calibration........................ ±8.15 mV maximum
Temperature coefficient............... ±50 µV/° C
Gain error
Using internal reference
After calibration.................... ±0.0061% (61 ppm) maximum
Before calibration ................. ±0.182% (1,820 ppm) maximum
Temperature coefficient ........ ±7.3 ppm/° C
Using external reference.............. ±0.15% (1,500 ppm),
not adjustable
Temperature coefficient ........ ±7.3 ppm/° C
Onboard reference
Temperature coefficient............... 2 ppm/° C maximum
Long-term stability...................... 15 ppm 1 000 h,