Filter
Top Products
Index
©
National Instruments Corporation I-19 AT-MIO-16X User Manual
analog output, 2-29 to 2-30
digital I/O, 2-31 to 2-32
field wiring considerations, 2-42 to 2-43
I/O connector
exceeding maximum ratings
(warning), 2-14
pin assignments
50-pin connector (figure),
2-15, B-2
68-pin connector (figure),
2-16, B-3
power connections, 2-32 to 2-33
RTSI switch, 5-37 to 5-39
signal descriptions (table), 2-17 to 2-19,
B-4 to B-6
timing connections, 2-33 to 2-42
counter signal connections,
2-37 to 2-42
data acquisition timing connections,
2-33 to 2-42
EXTCONVERT* signal, 2-34
EXTGATE* signal, 2-36
EXTSTROBE* signal, 2-33
EXTTMRTRIG* signal, 2-36
EXTTRIG* signal, 2-35
SCANCLK signal, 2-33
types of signal sources, 2-21
floating, 2-21
ground-referenced, 2-21
Single Conversion Register, 4-51
single conversions, programming
flow chart, 5-6
generating single conversions, 5-6
reading single conversion result, 5-7
using SCONVERT or EXTCONV*
signal, 5-5 to 5-6
single-analog input channel,
programming, 5-15
single-channel data acquisition timing,
3-9 to 3-12. See also data acquisition
programming.
posttrigger data acquisition timing,
3-10 to 3-11
pretrigger data acquisition timing,
3-11 to 3-12
programming sequence, 5-7 to 5-9
sample-interval timer, 3-9
specifications, A-4
single-ended connections
description, 2-26 to 2-37
floating signal sources (RSE), 2-27
grounded signal sources (NRSE), 2-28
when to use, 2-26
single-read timing, 3-8 to 3-9
software programming choices
ComponentWorks, 1-4
LabVIEW and LabWindows/CVI, 1-4
NI-DAQ driver software, 1-5 to 1-6
register-level programming, 1-6
VirtualBench, 1-5
SOURCE, OUT, and GATE timing signals
counter signal connections, 2-37 to 2-42
RTSI bus interface circuitry, 3-30
timing I/O circuitry, 3-27 to 3-29
SOURCE1 signal (table), 2-18, B-5
SOURCE5 signal (table), 2-18, B-6
specifications
Am9513A System Timing Controller,
C-33 to C-38
analog data acquisition rates, A-4 to A-6
analog input, A-1 to A-4
analog output, A-6 to A-8
digital I/O, A-8
operating environment, A-9
physical characteristics, A-9
power requirements, A-9
storage environment, A-9
timing I/O, A-8
SRC3SEL bit
description, 4-23 to 4-24