Filter
Top Products
4
© 2008, 2009 TOSHIBA TEC CORPORATION All rights reserved MJ-1103/1104
DISASSEMBLY AND INSTALLATION
4 - 39
(9) Open the stationary tray.
(10) Remove the spring, and then loosen 2
screws to free the belt tension.
(11) Take off the belt.
Fig. 4-107
(12) Remove one screw, and then sensor bracket
of feeding sensor.
Fig. 4-108
(13) Push the jam access lever of the junction box
to the right side, and then open the transport
guide.
Fig. 4-109
Spring
Belt
Sensor
bracket
Jam access lever