Filter
Top Products
MJ-1103/1104 © 2008, 2009 TOSHIBA TEC CORPORATION All rights reserved
DISASSEMBLY AND INSTALLATION
4 - 50
[F] Stack transport roller-1
(1) Take off the finishing tray unit.
P.4-19 "[D] Finishing tray unit"
(2) Remove 3 screws, and then take off the front
finishing tray cover.
Fig. 4-138
(3) Remove 3 screws, and then take off the rear
finishing tray cover.
Fig. 4-139
(4) Remove 2 E-rings, and then take off the pin
and the stack transport roller-1.
Fig. 4-140
Front finishing tray cover
Rear finishing tray cover
Stack transport roller-1
Stack transport roller-1
Pin
Pin