Filter
Top Products
4
© 2008, 2009 TOSHIBA TEC CORPORATION All rights reserved MJ-1103/1104
DISASSEMBLY AND INSTALLATION
4 - 91
4.9 Sensors / Switches (Finisher section)
[A] Entrance sensor (S1)
[B] Transport sensor (S2)
(1) Take off the stationary tray.
P.4-1 "[A] Stationary tray"
(2) Remove 1 screw, and then disconnect the
connector to take off the sensor bracket.
Fig. 4-255
(3) Release the latch, and then take off the
entrance sensor.
Fig. 4-256
(1) Take off the stationary tray.
P.4-1 "[A] Stationary tray"
(2) Close the buffer unit-1.
(3) Release the latch while lifting up the actua-
tor, and then disconnect the connector to
take off the transport sensor.
Fig. 4-257
Sensor bracket
Entrance sensor
Sensor bracket