Filter
Top Products
MJ-1103/1104 © 2008, 2009 TOSHIBA TEC CORPORATION All rights reserved
DISASSEMBLY AND INSTALLATION
4 - 40
[B] Junction roller
(14) Remove one E-ring, and then take off the
knob and pin.
(15) Remove one clip, and then take off the bush-
ing.
Fig. 4-110
(16) Remove one E-ring, and then take off the
pulley and pin.
(17) Remove one clip, and then take off the bush-
ing. Take off the feeding roller and transport
guide.
Fig. 4-111
(1) Take off the junction box unit.
P.4-13 "[A] Junction box unit"
(2) Remove one E-ring, and then take off the
gear and pin.
(3) Remove one clip, and then take off the bush-
ing.
Fig. 4-112
Knob
Pin
Bushing
Clip
Transport guide
Feeding roller
Bushing
Clip
Pulley
Pin
Clip
Bushing
Pin
Gear