Filter
Top Products
MJ-1103/1104 © 2008, 2009 TOSHIBA TEC CORPORATION All rights reserved
DISASSEMBLY AND INSTALLATION
4 - 100
[M] Movable tray position-a sensor (S13) / Movable tray position-B sensor (S14) / Movable tray
position-c sensor (S15)
(3) Move the front alignment plate guide in the
direction of the arrow.
(4) Release the latch, and then disconnect the
connector to take off the finishing tray paper
detection sensor.
Fig. 4-282
(1) Take off the rear cover.
P.4-6 "[G] Rear cover"
(2) Move the movable tray shift frame to the mid-
dle position. If the movable tray shift frame
needs to be lowered, push the gear of the
movable tray shift motor unit in the direction
of the arrow to unlock the frame. (Be sure to
hold the movable tray gear frame with your
hands because it may fall when the gear is
pushed.)
Fig. 4-283
Front alignment plate guide
Finishing tray paper detection sensor
Movable tray
Gear of the
movable tray
shift motor unit