Filter
Top Products
3
© 2008, 2009 TOSHIBA TEC CORPORATION All rights reserved MJ-1103/1104
DESCRIPTION OF OPERATIONS
3 - 5
[B] Paper exit to the stationary tray
Paper transported from the Finisher feeding section to the stationary tray side is exited to the stationary
tray with the stationary tray roller driven by the exit motor (M11).
The entrance sensor (S1) detects the paper transport to the stationary tray.
The stationary tray paper-full sensor (S18) detects the overload of paper on the stationary tray.
Fig. 3-6
Exit motor
Entrance sensor
Stationary
tray roller
Stationary tray
paper-full sensor