Filter
Top Products
3
© 2008, 2009 TOSHIBA TEC CORPORATION All rights reserved MJ-1103/1104
DESCRIPTION OF OPERATIONS
3 - 19
[G] Additional folding / exiting
The stack of paper folded by the folding roller is stopped with the exit transport sensor (S41) at the stop-
ping position. The folded paper is then folded again by moving the additional folding carrier roller for-
ward and backward.
The home position of the additional folding carrier is detected by the additional folding home position
sensor (S39).
The additional folding carrier is driven by the additional folding motor (M20). The rotation of the addi-
tional folding motor (M20) is detected by the additional folding motor encoder sensor (S42).
Fig. 3-23
After this, the paper is exited to the saddle tray with the saddle exit roller driven by the folding motor
(M17).
The passing of the paper is detected by the exit sensor (S31).
The presence of paper on the saddle tray is detected by the stack tray paper detection sensor (S32).
Fig. 3-24
Additional folding
home position sensor
Additional folding carrier
Additional
folding carrier
roller
Additional
folding motor
Additional folding
motor encoder sensor
Exit transport sensor
Folding motor
Saddle tray
Saddle exit roller
Exit sensor
Folding roller
Stack tray paper
detection sensor