Filter
Top Products
4
© 2008, 2009 TOSHIBA TEC CORPORATION All rights reserved MJ-1103/1104
DISASSEMBLY AND INSTALLATION
4 - 5
[E-2] Front upper cover (MJ-1104)
[E-3] Front lower cover (MJ-1104)
(1) Remove 1 screw on the upper side of the
front rail cover.
Fig. 4-12
(2) Open the front cover, and then remove 1
screw on the left side of the control panel
unit.
(3) Slide the front cover upward and take it off
while you are sliding the left side of the con-
trol panel unit toward you.
Fig. 4-13
(1) Open the front upper cover and then pull out
the saddle unit.
(2) Remove 4 screws, and then take off the front
lower cover.
Fig. 4-14
Front rail cover
Front cover Control panel unit
Front lower cover