Filter
Top Products
MJ-1103/1104 © 2008, 2009 TOSHIBA TEC CORPORATION All rights reserved
DISASSEMBLY AND INSTALLATION
4 - 18
(8) Release the harness out of 5 clamps, and
then disconnect the relay connector of the
paper holding arm motor.
Fig. 4-50
(9) Take off the belt of the buffer roller drive
motor.
Fig. 4-51
(10) Disconnect the connector of the buffer roller
drive motor and release the harness out of
the clamp.
Fig. 4-52
Cramp
Cramp
Relay
connector
Buffer roller drive motor
Belt
Buffer roller drive motor
Connector
Cramp