Filter
Top Products
MJ-1103/1104 © 2008, 2009 TOSHIBA TEC CORPORATION All rights reserved
DISASSEMBLY AND INSTALLATION
4 - 102
[N] Movable tray paper-full sensor (S16)
[O] Movable tray paper exist sensor (S17)
[P] Stationary tray paper-full sensor (S18)
(1) Take off the grate-shaped guide.
P.4-10 "[N] Grate-shaped guide"
(2) Move the shutter upward.
(3) Release the latch, and then disconnect the
connector to take off the movable tray paper-
full sensor.
Fig. 4-287
(1) Take off the movable tray.
P.4-2 "[B] Movable tray"
(2) Disconnect the connector of the movable
tray paper exist sensor.
(3) Release the latch, and then take off the mov-
able tray paper exist sensor.
Fig. 4-288
(1) Take off the stationary tray.
P.4-1 "[A] Stationary tray"
(2) Hold up the jam access lever. Then remove 1
screw and disconnect the connector to take
off the bracket.
Fig. 4-289
Sensor brackt
Movable tray paper-full sensor
Movable tray paper
exist sensor
Jam access lever
Bracket