Filter
Top Products
MJ-1103/1104 © 2008, 2009 TOSHIBA TEC CORPORATION All rights reserved
DISASSEMBLY AND INSTALLATION
4 - 14
(9) Open the stationary tray.
(10) Remove the spring, and then loosen 2
screws to free the belt tension.
(11) Take off the belt.
Fig. 4-38
(12) Disconnect the connector of the front cover
switch.
Fig. 4-39
(13) Remove 6 screws, and then take off the junc-
tion box unit by sliding it upward.
Note:
When installing the junction box unit, hang
the 2 hooks of the cover on the hooks of the
frame.
Fig. 4-40
Spring
Belt
front cover switch
Junction box unit
Hook