Filter
Top Products
MJ-1103/1104 © 2008, 2009 TOSHIBA TEC CORPORATION All rights reserved
DISASSEMBLY AND INSTALLATION
4 - 52
[H] Buffer roller
(1) Take off the buffer unit.
P.4-15 "[B] Buffer unit"
(2) Loosen 1 screw, and then tighten the screw
by pushing the plate in the direction of the
arrow. (Loosen the belt tension.)
Fig. 4-144
(3) Disconnect the connector of the buffer tray
guide motor.
Fig. 4-145
(4) Take off the belt of the buffer roller drive
motor.
Fig. 4-146
Plate
Connector
Buffer tray guide motor
Buffer roller drive motor
Belt