Filter
Top Products
MJ-1103/1104 © 2008, 2009 TOSHIBA TEC CORPORATION All rights reserved
DISASSEMBLY AND INSTALLATION
4 - 118
[N] Exit transport sensor (S41)
[O] Additional folding motor encoder sensor (S42)
(1) Take off the EFS unit.
P.4-35 "[G] EFS unit"
(2) Remove 1 screw, and then disconnect the
connector and take off the exit transport sen-
sor.
Fig. 4-335
(1) Take off the additional folding motor.
P.4-78 "[E] Additional folding motor
(M20)"
(2) Remove 1 screw, and then take off the sen-
sor bracket.
Fig. 4-336
(3) Release the latch, and then take off the addi-
tional folding motor encoder sensor.
Fig. 4-337
Exit transport sensor
Sensor bracket
Additional folding motor encoder sensor