Filter
Top Products
4
© 2008, 2009 TOSHIBA TEC CORPORATION All rights reserved MJ-1103/1104
DISASSEMBLY AND INSTALLATION
4 - 21
(6) Remove 3 clips on the rear side of the stack
transport roller-2. Then remove the transport
roller pulley-1, transport roller pulley -2, 2
pins, bushing and belt.
Notes:
• Be sure not to lose the fixing pins for the
pulleys.
• Be sure not to lose the belt.
Fig. 4-58
Fig. 4-59
(7) Remove 2 clips on the rear side of the stack
transport roller-1. Then remove the transport
roller pulley -3, pin and bushing.
Note:
Be sure not to lose the fixing pins for the pul-
leys.
Fig. 4-60
Stack transport roller-2
Pin
Transport roller pulley-1
Clips
Bushing
Pin
Belt
Clips
Transport roller
pulley-2
Bushing
Clips
Transport roller pulley-3
Pin