Filter
Top Products
MJ-1103/1104 © 2008, 2009 TOSHIBA TEC CORPORATION All rights reserved
GENERAL DESCRIPTION
2 - 10
3. Electromagnetic spring clutches (Finisher section : Common for MJ-1103/1104)
4. Electromagnetic spring clutches (Saddle section: MJ-1104)
5. Solenoids (Finisher section : Common for MJ-1103/1104)
6. Solenoids (Saddle section: MJ-1104)
Symbol Name Function P-I Remarks
CLT1 Shutter clutch Transmits the drive of the transport
motor to the shutter opening/closing
section.
P3-I27 P.2-8 "Fig. 2-8"
CLT2 Paper exit guide clutch Transmits the stack transport motor
drive to the paper exit guide.
P10-I26 P.2-8 "Fig. 2-8"
Symbol Name Function P-I Remarks
CLT3 Folding blade clutch Transmits the drive of the folding motor
to the folding blade.
P19-I19 P.2-8 "Fig. 2-8"
CLT4 Paper holding clutch Transmits the drive of the saddle trans-
port motor to the paper holding cam.
P21-I22 P.2-8 "Fig. 2-8"
Symbol Name Function P-I Remarks
SOL1 Catching solenoid Catches paper on the buffer tray. P5-I4 P.2-8 "Fig. 2-8"
SOL2 Buffer roller lift solenoid Moves up/down the buffer roller
(Turned ON to lift up the roller).
P8-I6 P.2-8 "Fig. 2-8"
SOL3 Patting solenoid Drops paper on the buffer tray to the
finisher tray.
P8-I5 P.2-8 "Fig. 2-8"
SOL4 Gate solenoid Switches paper transport destination
(stationary tray / movable tray).
P7-I29 P.2-8 "Fig. 2-8"
Symbol Name Function P-I Remarks
SOL5 Transport path switching sole-
noid
Switches destinations where paper is
to be transported (Finisher section or
saddle stitch section).
P16-I23 P.2-8 "Fig. 2-8"
SOL6 Assisting roller solenoid Operates the assisting roller. P27-I14 P.2-8 "Fig. 2-8"