Filter
Top Products
4
© 2008, 2009 TOSHIBA TEC CORPORATION All rights reserved MJ-1103/1104
DISASSEMBLY AND INSTALLATION
4 - 123
[D] Front stationary tray discharge brush / Rear stationary tray discharge brush
(1) Take off the stationary tray.
P.4-1 "[A] Stationary tray"
(2) Loosen 1 rear side screw. Peel off the mylar
form around the screws, remove 2 screws,
and then take off the .
Note:
When installing the brush, fix the Mylar form
securely.
Fig. 4-347
(3) Loosen 1 front side screw. Peel off the mylar
form around the screws, remove 2 screws,
and then take off the rear stationary tray dis-
charge brush.
Note:
When installing the brush, fix the Mylar form
securely.
Fig. 4-348
Front stationary tray
discharge brush
Mylar
Mylar
Rear stationary tray
discharge brush